3dmodel joystick studio tutorial
Here I will tell you about 3dsmax 3dmodel joystick studio tutorial.
I have some used following techniques shown below in this 3ds max tutorial.
[1]-First of all you will press (ctrl +N) now you will see the new window is open
Click on the Geometry > Extended primitives > Chamfer Box and use the following setting
Create a Chamfer Box in the top view port
[2]-Create Cone with the following size
Radius1: 27, Radius2: 13, Height: 20.463
Create like this in the top view port
Set in the front like this
[3]-Select the Cone and convert into the Editable poly
Now select the polygon mode and make a selection like this
Assign the material like this
[4]-Now apply the Turbo Smooth Modifier with Iterations:2
Your object should like this
[5]-Create a Cylinder with following size
Radius: 5,Heigtht: 48
Create like this in the top view port
[6]-Create a sphere with the following (Radius: 12.9)
[7]-Create a plane with following size
Length: 61.0, Width: 57.0
Create a like this in the top view port
[8]-Create a two Chamfer Cylinder like this
In the top view port with same following size
[9]-Select the plane and click on the Boolean button
Now click on the Pick Operand B and click on the chamfer cylinder like this
[10]-Now your plane should like this
same following step for the second chamfer cylinder
[11]-Create a another chamfer cylinder and set like this in the top view port
[12]-Open the material window and make a material like this
Now assign to the object
[13]-After assign the material press (F9) and you will see the final is ready
Save the file in your folder
Thanks for watching my tutorial
3d model people
3d model program
3d model reference