Photoshop and 3ds Max Graphics Tutorials

Today I will show you how to create a Photoshop design paint brush logo icon in photoshop.

[1] Take a new file of 500 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.

[2] Now create a new shape with the help of Pen Tool.

[3] Right click select make selection click ok. Then fill that layer with #f6a144.

[4] Take the “Burn Tool”  then create following Shading with
the help of Burn Tool.

[5] Take the “Dodge Tool” image-6  highlight the following parts,
with the help of Dodge Tool.

[6] Create a new shape with the help of pen Tool, right click select
make selection open a new layer fill the selection with #85908c.

[7] Take the “Dodge Tool” highlight the following parts,
with the help of Dodge Tool.

[8] Create another shape with the help of Pen Tool, right click select
make selection open a new layer fill the selection with #85908c.

[9] With the “Dodge Tool” highlight the following parts,
with the help of Dodge Tool.

[10] Take the Brush Tool set the properties like this, then set
the foreground color is #908b92

[11] Open a new layer, create a stoke with the help of Pen Tool right click select,
stroke path then select Brush click ok.

[12] This is my result.

[13] Take the “Dodge Tool” highlight the following parts,
with the help of Dodge Tool.

[14] Create the following shape with the help of Pen Tool right click
make selection open a new layer fill the selection with #efe3bd.

[15] Take the “Burn Tool”  then create following Shading with
the help of Burn Tool.

[16] Now go to Filter>Noise>Add Noise use these settings.

[17] Take the “Dodge Tool” after that create the following selection with
the help of elliptical marquee tool & then highlight the following parts,
with the help of Dodge Tool.

[18] Your image something like this.

[19] Create a small circle with the help of Elliptical Marquee Tool,
fill that layer with #4b4d4a.

[20] Take the “Dodge Tool” now move the selection with Down Arrow key,
press Cntl+Shift+I, & then highlight the following parts, with Dodge Tool.

[21] Now select all layers press Cntl+E to merge down layers then give the
layer styles.

[22] Thanks for read this Photoshop Tutorial. I hope this is a good tutorial & you can use
these Photoshop Techniques & the Final Image should look like as shown below.

adobe photoshop effects
adobe photoshop logo
adobe photoshop watermark

Photoshop design spectrumfx2 logo icon in photoshop

Photoshop design scissor logo icon in photoshop

Today I will show you how to create a Photoshop design water cooler logo icon in photoshop.

[1] Take a new file of 400 pixels, 600 pixels, of resolution 72 dpi in the RGB mode.

[2] Now create a new shape with the help of Pen Tool.

[3] Right click select make selection click ok. Then fill that layer with #ffc9cf.

[4] Take the “Burn Tool”   move the selection with Up Arrow Key, press Cntl+Shift+I,
then create following Shading with Burn Tool as shown below.

[5] Now press Cntl+Shift+I, & then With the Burn Tool create the following
shading as shown below do not “D” select.

[6] Take the “Dodge Tool”  highlight the following parts,
with the help of Dodge Tool.

[7] Create a new shape with the help of Pen Tool right click select,
make selection open a new layer fill the selection with #dc7e74.

[8] With the “Dodge Tool”  highlight the following parts,
with the help of Dodge Tool.

[9] Create a new shape with the help of Rounded Rectangle Shape Tool,
right click select make selection fill that layer with #faa7b9.

[10] Select “Dodge Tool”   & Highlight the some parts like as shown
below.

[11] Now Open New Layer & then create the following shape with the help of Pen Tool.
fill the selection with #d798ab.

[12] create the following shape with the help of Pen Tool,
fill the selection with #ded4dd.

[13] Select “Dodge Tool”   & Highlight the some parts like as shown
below.

[14] For this shape add the following layer styles.

[15] Create a new shape with the help of Polygonal Lasso Tool,
open a new layer fill the selection with #a05a62.

[16] Take the “Burn Tool”   then create following Shading with
the help of Burn Tool.

[17] Duplicate that layer press Cntl+T right click select Flip Horizontal,
& then place it like me.

[18] Create a new shape with the help of Pen Tool, right click select Make Selection
open a new layer fill the selection with #bf706b.

[19] Take the “Dodge Tool” set the properties like this.

[20] Create the Stoke with the help of Pen Tool, right click select Stoke Path
now select Dodge click ok.

[21] Your image something like this.

[22] Take the “Burn Tool”   then create following Shading with
the help of Burn Tool.

[23] Now Duplicate that layer press Cntl+T right click select Flip Horizontal
and place it like me.

[24] Create a new shape with the help of Elliptical Marquee Tool,
fill that layer with #be636a.

[25] Take the “Burn Tool”   then create following Shading with
the help of Burn Tool.

[26] Create two small circle with Elliptical Marquee Tool,
fill that layer with #443228.

[27] Create a new shape with the help of Pen Tool, right click select make selection
open a new layer fill the selection with #eb867a.

[28] Take the “Burn Tool”   then create following Shading with
the help of Burn Tool.

[29] Open a new layer, create a following selection with Elliptical Marquee Tool,
right click select Stoke apply the following settings.

[30] Your image something like this.

[31] And now set the opacity 23%.

[32] Now Duplicate that layer and place it like me.

[33] Create a new shape with the help of Pen Tool, right click select
make selection open a new layer fill the selcetion with #e9827c.

[34]  Select “Dodge Tool”   & Highlight the some parts like as shown
below.

[35] Duplciate that layer press cntl+T right click
select Flip Horizontal and then place it like me.

[36] Download a flowers and open it photoshop.

[37] Thanks for read this Photoshop Tutorial. I hope this is a good tutorial & you can use
these Photoshop Techniques & the Final Image should look like as shown below.

adobe photoshop effects
adobe photoshop logo
adobe photoshop watermark

Photoshop Finger Print Reader Logo Icon

Photoshop Emboss Love Heart Pendant

Today I will show you how to create a Photoshop design head phone logo icon in photoshop.

[1] Take a new file of 600 pixels, 500 pixels, of resolution 72 dpi in the RGB mode.

[2] Now create a new shape with the help of Pen Tool. Right click select
make selection click ok. Then fill that layer with #666668

[3] Take the “Burn Tool”  then create following Shading with
the help of Burn Tool.

[4] Take the “Dodge Tool” highlight the following parts,
with the help of Dodge Tool.

[5] Create a new shape with the help of Pen Tool, Right click select
make selection click ok. Then fill that layer with #909291.

[6] Take the “Dodge Tool” now create the following selection with the
help of Elliptical Marquee Tool press Cntl+Shift+I then highlight the following parts,
with the help of Dodge Tool. Do not “D” select.

[7] Take the “Burn Tool”  then create following Shading with
the help of Burn Tool.

[8] Press Cntl+Shift+I with the Burn Tool, create following Shading with
the help of Burn Tool.

[9] Take the “Dodge Tool” highlight the following parts,
with the help of Dodge Tool.

[10] Create a new shape with the help of Elliptical Marquee Tool,
fill that layer with #bbbbbd.

[11] Create another shape with the help of Elliptical Marquee Tool,
fill that layer with #252525.

[12] Take the “Burn Tool”  select the previous layer,
then create following Shading with the help of Burn Tool.

[13] Create another shape with the help of Elliptical Marquee Tool,
fill that layer with #9c9c9c.

[14] Take the “Burn Tool”  then create following Shading
with the help of Burn Tool.

[15] Create a new shape with the help of Pen Tool, right click select make
selection fill that layer with #cbcbcb.

[16] Take the “Burn Tool”  then create following Shading
with the help of Burn Tool.

[17] Create a new shape with the help of “Pen Tool” right click select make
selection fill that layer with #858587.

[18] Take the “Dodge Tool” highlight the following parts,
with the help of Dodge Tool.

[19] Take the “Burn Tool”  then create following Shading
with the help of Burn Tool.

[20] Create a new shape with the help of “Pen Tool” right click select make selection,
open a new layer fill the selection with #2b2a2f.

[21] Take the “Dodge Tool” highlight the following parts,
with the help of Dodge Tool.

[22] Take Brush Tool use these settings.

[23] Create the following Stroke with the help of Pen Tool,

[24] Open a new layer, set the foreground color is #6a6a6a, now right click
select Stroke Path then select Brush click ok.

[25] Your image something like this.

[26] For this shape add the following layer styles.

[27] Create a new shape with the help of Pen Tool, right click select make selection,
fill that layer with #131116.

[28] Take the “Dodge Tool” highlight the following parts,
with the help of Dodge Tool.

[29] Create a new shape with Rectangular Marquee Tool fill that layer with #7f7f7f.

[30] Take the “Burn Tool”  then create following Shading
with the help of Burn Tool.

[31] Take the “Brush Tool” press F5 set the properties like this.

[32] Open a new layer, Create a stroke with the help of Pen Tool, right click select
Stroke Path now select Brush Click ok.

[33] Your image something like this.

[34] Now duplicate  a few time and place it like me and now erase the outside area
with the help of Eraser Tool.

[35] Thanks for read this Photoshop Tutorial. I hope this is a good tutorial & you can use
these Photoshop Techniques & the Final Image should look like as shown below.

adobe photoshop effects
adobe photoshop logo
adobe photoshop watermark

3dsmax multicolor effect studio tutorial

3d basic advance light effect tutorial

Today I will show you how to create a Photoshop drawing Lennon logo icon in Photoshop.

[1] Take a new file of 600 pixels, 500 pixels, of resolution 72 dpi in the RGB mode.

[2] Now create a new shape with the help of Pen Tool.

[3] Right click select make selection click ok. Then fill that layer with #feb80a.

[4] Take the “Dodge Tool” highlight the following parts,
with the help of Dodge Tool.

[5] Take the “Burn Tool”  then create following Shading with
the help of Burn Tool.

[6] Take the “Dodge Tool” highlight the following parts,
with the help of Dodge Tool.

[7] Now go to Filter>Distort>Glass apply the following settings.

[8] Your image something like this.

[9] Take the “Dodge Tool” now create the following selection
with the help of Pen Tool, highlight the following parts,
with the help of Dodge Tool.

[10] Now move the selection with the help of Left Arrow Key,
highlight the following parts, with the help of Dodge Tool.

[11] Take the “Burn Tool”  then create following Shading with
Burn Tool as shown below.

[12] Thanks for read this Photoshop Tutorial. I hope this is a good tutorial & you can use
these Photoshop Techniques & the Final Image should look like as shown below.

adobe photoshop effects
adobe photoshop logo
adobe photoshop watermark

Photoshop ducati sandisk usb flashdrive logo icon in photoshop

Photoshop drawing scenry in photoshop

Today I will show you how to create a Photoshop design one piece toilet logo icon in Photoshop.

[1] Take a new file of 600 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.

[2] Now create a new shape with the help of Pen Tool.

[3] Right click select make selection click ok. Then fill that layer with #cfdade.

[4] Take the “Burn Tool” create the following selection with the help
of Pen Tool then create following Shading with the help of Burn Tool.

[5] Create the following selection with the help of Pen Tool,
then create following Shading with the help of Burn Tool.

[7] Create another selection with the help of Pen Tool
now go to Select>Modify>Feather by 2px.

[8] Take the “Dodge Tool” then highlight the following parts
with the help of Pen Tool.

[9] Create the following selection with Pen Tool,
now go to Select>Modify>Feather by 2px.

[10] Take the “Burn Tool” then create following Shading
with the help of Burn Tool.

[11] Take the Brush Tool now press F5 apply the following settings.

[12] Open a new layer, create the following shape with the help of Pen Tool,
right click select Stroke Path, now select Brush click ok.

[13] Your image something like this.

[14] Now go to Filter>Blur>Motion Blur apply the following settings.

[15] Your image something as shown below.

[16] Create a new shape with the help of Pen Tool, right click select make
selection open a new layer fill the selection with #dde6ed.

[17] Take the “Burn Tool” then create following Shading
with the help of Burn Tool.

[18] Take the Brush Tool now press F5 apply the following settings.

[19] Make a new layer, Create a shape with the help of Pen Tool, right click
select Stroke Path then select Brush click ok.

[20] Your image something look like this.

[21] For this layer set the Opacity 22%.

[22] Simillarly create another shape with Stroke Path & set the Opacity 22%.

[23] Create a new shape with the help of Elliptical Marquee Tool, fill that layer with #130f0e,
now go Select>Modify>Contract Selection 5px.

[24] Take the “Dodge Tool” & then Highlight the following parts
with the help of Dodge Tool.

[25] Thanks for read this Photoshop Tutorial. I hope this is a good tutorial & you can use
these Photoshop Techniques & the Final Image should look like as shown below.

adobe photoshop effects
adobe photoshop logo
adobe photoshop watermark

Photoshop 3D Metal Box Logo Icon

Photoshop Custom Shape Website Button

Today I will show you how to create a Photoshop design ice cream icon logo in Photoshop.

[1] Take a new file of 600 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.

[2] Create a shape with the help of Elliptical Marquee Tool,
fill that layer with #ef80a1.

[3] Take the “Burn Tool”  create the following shading with the help of Burn Tool.

[4] You have still select Burn Tool now select the brush size 7px then press F5 use these settings.

[5] Now create a shape with the help of Pen Tool right click select Stoke Path
now select Burn click ok.

[6] Now repeat step 5.

[7] Take the “Dodge Tool” apply the following settings.

[8] Create a shape with the help of Ellipse Shape Tool, then right click select Stoke Path,
now select Dodge click ok.

[9] Your image something like this.

[10] Take the “Burn Tool” apply the following settings.

[11] Create a shape with the help of Ellipse Shape Tool, then right click select Stoke Path,
now select Burn click ok.

[12] Your image something like this.

[13] Create another shape with the same technique.

[14] Create a shape with the help of “Pen Tool” right click select make selection,
open a new layer fill the selection with #fe9fc9.

[15] Take the “Burn Tool”  create the following shading with the help of Burn Tool.

[16] With the “Dodge Tool” highlight the following parts
with the help of Dodge Tool.

[17] Take the Burn Tool set the Brush Size now press F5 set the porperties like this.

[18] Create a shape with the help of Pen Tool, right click select Stoke Path,
now select Burn click ok.

[19] Your image something like this.

[20] Now repeat step 18.

[21] Go to Filter>Artistic>Plastic Warp use these settings.

[22] Your image something like this.

[23] Now change the Blending Mode to Soft Light.

[24] Take the Brush Tool set the properties like this.

[25] Open a new layer now play with your Brush Tool.

[26] Create a shape with the help of Elliptical Marquee Tool fill that layer with White.

[27] Now go to Layer Style>Style select Red Gel see in the next image.

[28] Thanks for read this Photoshop Tutorial. I hope this is a good tutorial & you can use
these Photoshop Techniques & the Final Image should look like as shown below.

adobe photoshop effects
adobe photoshop logo
adobe photoshop watermark

Photoshop design bluethoth logo icon in photoshop

Photoshop Ice Berg Digital Painting

Here I am telling you about How to Create Photoshop File Folder Office Website Graphics

[1]-First of all Open New Document of Custom size,Height & Width 400×500 pixels,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following selection with the help of ‘Polygonal Lasso Tool’

[3]-Now fill the selection with ‘0180cf’ color & then create the following selection with the help of Polygonal Lasso Tool

[4]-Now select ‘Burn Tool’       & create the following shading  & then press Ctrl+Shift+I & create
the shading like as shown below

[5]-Now Open New Layer & then create the following selection with the help of ‘Polygonal Lasso Tool’

[6]-Now fill the selection with ‘a8ac9b’color & then create the following selection with the help of ‘Pen Tool’& create the
following shading with the help of ‘Burn Tool’

[7]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[8]-Now fill the selection with ‘dc5494′ color & then create the following selection with the help of ‘Pen Tool’ & press
Ctrl+Shift+I & create the shading with the help of “Burn Tool” like as shown below

[9]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[10]-Now fill the selection with ‘dfdfdc’ color & then create the following selection with the help of ‘Pen Tool’ & Highlight
the some parts with the help of “Dodge Tool’ & create the following shading with the help of ‘Burn Tool’ & then press
Ctrl+Shift+I & create the shading like as shown below

[11]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[12]-Now fill the selection with ‘392c23′color & then select ‘Dodge Tool’          & Highlight the some
Parts like as shown below

[13]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[14]-Now fill the selection with ‘9c9783′color & create the following shading with the help of ‘Burn Tool’

[15]-Now Open New Layer & then create the following selection with the help of ‘Polygonal Lasso Tool’

[16]-Now fill the selection with ‘b7b8cc’color & then create the following selection with the help of ‘Pen Tool’ & Highlight
the selected Parts with the help of Dodge Tool

[17]-Now set the 2 pxl Burn Tool,create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[18]-Now use the following settings in Stroke Path

[19]-Now like this create the other shading & after that set the 1pxl Brush Tool,Open New Layer & create the following shape
with the help of “Pen Tool” right click select “Stroke Path”

[20]-Now use the following settings in Stroke Path & like this create the others

[21]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[22]-Now fill the selection with ‘000000′color & then go to Blending Options,select Stroke Structure & use the following
settings
Photoshop Technique-How to use the Stroke Structure feature

[23]-Now your image should look like as shown below

[24]-Now create the following selection with the help of ‘Pen Tool’ & then fill  with same color

[25]-Now Open New Layer & then create the following selection with the help of Polygonal Lasso Tool

[26]-Now fill the selection with ‘e3eaf4′color & like this create the others

[27]-Now set the 5 pxl Brush & then Open New Layer & create the following shape with the help of ‘Pen Tool’ right click
select ‘Stroke Path’

[28]-In Stroke Path select ‘Brush’ & then ok & your image should look like as shown below

[29]-Now select “Erase Tool” & use the following settings

[30]-Now Erase the some parts with the help of Erase Tool & your image should look like as shown below

[31]-Now like this create the other & then create the following selection with the help of “Pen Tool”

[32]-Now fill the selection with ‘000000′color & then go to Blending Options,select Stroke Structure & use the following
settings
Photoshop Technique-How to use the Stroke Structure feature

[33]-Now set the 1pxl Brush & then open new layer & create the following shape with the help of Pen Tool,right click
select “Stoke Path” & In Stroke Path select ‘Brush’ & then ok

[34]-Now like this create the others & select Background Layer & create the some shading with the help of Burn Tool
See below for Final Photoshop Output.I hope this is a good tutorial & U can use these Photoshop Techniques in your Graphics
Design Project

adobe photoshop effects
adobe photoshop logo
adobe photoshop watermark

3d model Pool Triangle studio tutorial

3dmodel Bridge studio tutorial

Here I am teaching you about How to Create Photoshop Plastic Mug Houseware Graphics Icon

[1]-First of all Open New Document of Custom size,Height & Width 500×600 pixels,Resolution 72 & Mode RGB Color

[2]-Now fill the Background with any color & then Open New Layer & create the following shape with the help of “Pen Tool”
right click select “Make Selection”

[3]-In Make Selection ‘Feather Radius’ should 0 pixels,Tick on New Selection & then Ok & your image should look like as
shown below

[4]-Now fill the selection with ‘aba571′color & then create the following selection with the help of Pen Tool

[5]-Now select ‘Burn Tool’           & create the following shading & after that press Ctrl+Shift+I
& create the shading like as shown below

[6]-Now select ‘Dodge Tool’           & create the following selection with the help of ‘Elliptical Marquee
Tool’ & press Ctrl+Shift+I & Highlight the some parts like as shown below

[7]-Now set the 3 pxl Brush Tool & Open New Layer & create the following shape with the help of ‘Pen Tool’ right click
select ‘Stroke Path’

[8]-In Stroke Path select ‘Brush’ & then ok

[9]-Now your image should look like as shown below

[10]-Now go to Blending Options,select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow feature

[11]-Now Open New Layer & then create the following selection with the help of Pen Tool

[12]-Now fill the selection with ‘eaf1ea’color & then create the some Shading with the help of ‘Burn Tool’ & Open New
Layer & create the following selection with the help of ‘Elliptical Marquee Tool’

[13]-Now fill the selection with same color & then create the following selection with the help of ‘Elliptical Marquee Tool’
Highlight the some Parts with the help of ‘Dodge Tool’

[14]-Now Open New Layer & then create the following selection with the help of Pen Tool

[15]-Now fill the selection with same color & Highlight the some parts with the help of ‘Dodge Tool’ like as shown below

[16]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[17]-Now fill the selection with ‘aba571′color & then create the following selection with the help of Pen Tool & create
the following shading with the help of ‘Burn & Dodge Tool’ & your image should look like as shown below

[18]-Now set the 1 pxl Brush & then Open New Layer & create the following shape with the help of ‘Pen Tool’ right click
select ‘Stroke Path’

[19]-In Stroke Path select “Brush” & then ok & like this create the others

[20]-Now go to Blending Options,select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow feature

[21]-Now select Background Layer & create the following shading with the help of ‘Burn Tool’
See below for Final Photoshop Output.I hope this is a good tutorial & U can use these Photoshop Techniques in your Graphics
Design Project

adobe photoshop effects
adobe photoshop logo
adobe photoshop watermark

3dmodel Military Binocular studio tutorial

3dmodel Gas Compressor studio tutorial.

Today I will show you how to create a Photoshop design iriver volcano music player in photoshop.

[1] Take a new file of 350 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.

[2] Now create a new shape with the help of Pen Tool.

[3] Right click select make selection click ok. Then fill that layer with #cacaca.
Do not “D” select.

[4] Take the “Dodge Tool” then create following highlight with the help of Dodge Tool.

[5] Take the “Burn Tool”  create the following shading with the help of Burn Tool.

[6] Create the following shape with the help of Pen Tool,
now right click select Stroke Path select Brush Tool,
now brush size is 1px.

[7] Now set the Opacity 29%.

[8] Your image something look like this.

[9] Create the following shape with the help of Rounded Rectangle Shape Tool.
Then fill the layer with #bbbbbb. Do not “D” select.

[10] Go to Select>Modify>Contract Selection By 2px.

[11] Take the “Dodge Tool” now press Cntl+Shift+I,
then create following highlight with the help of Dodge Tool.

[12] Create another shape with the help of Rounded Rectangle Tool,
open a new layer right click select make selection fill that layer with #aaaaaa.

[13] Now move the selection with the help of Down Arrow Key after that
select “Dodge Tool” now press Cntl+Shift+I highlight the some parts.

[14] Create a new shape with the help of Rounded Rectangle Tool
opne a new layer right click select make selection fill that
layer with #d7d7d7.

[15] Create a new shape with the help of Rectangular Marquee Tool,
fill the selection with Black.

[16] Create a new shape with the help of Pen Tool open a new layer
fill the selection with #d5c5a3.

[17] Create another shape with Pen Tool fill the layer with same color.

[18] Now Duplicate both shape layer and press Cntl+T right click select
Flip>Horizontal then place it like me.

[19] Create a new shape with the help of Pen Tool, open a new layer
right click select make selection fill that layer with #e8e8e8.

[20] Take the “Burn Tool”  create the following shading with the help of Burn Tool.

[21] Create another shape with the help of Pen Tool open a new layer,
fill the layer with same color.

[22] With the “Burn Tool” shading the some parts with the help of Burn Tool.

[23] Create a new shape with the help of Rounded Rectangle Tool open a new layer,
right click select make selection fill that layer with #1b1b1b.

[24] Take the “Dodge Tool” now move the selection with the help of Up Arrow Key,
press Cntl+Shift+I, then create following highlight with the help of Dodge Tool.

[25] Take the Shape Tool select this one create a shape take the Pen Tool,
right click select make selection open a new layer fill the selection
with #eff3f6.

[26] With the “Burn Tool”   shading the some parts with the help of Burn Tool.

[27] Now give the Stroke for this shape.

[28] Now create some icon with the help of Shape Tool and place it like me.

[29] Take the Text Tool set the properties like me.

[30] After that create your text like this.

[31] Thanks for read this Photoshop Tutorial. I hope this is a good tutorial & you can use
these Photoshop Techniques & the Final Image should look like as shown below.

adobe photoshop effects
adobe photoshop logo
adobe photoshop watermark

3d garden bench studio tutorial

Photoshop earplug headphone logo icon in photoshop

Today I will show you how to create a Designer stop watch clock log icon in photoshop.

[1] Take a new file of 400 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.

[2] Create a new shape with the help of Rounded Rectangle Tool. Radius by 80 px.
Make a new layer. Right click select make selection fill the selection with #8698a2.
Do not “D” select.

[3] Make a new layer fill the selection with #4f616b.

[4] Create the following selection with Rounded Rectangle Tool.
Hit the Delete key your image something like this.

[5] Take the “Dodge Tool” create following highlight with the help of Dodge Tool.

[6] Create the following selection with the help of Rounded Rectangle Tool.

[7] Take the “Dodge Tool” create following highlight with the help of Dodge Tool.

[8] For this shape add the following layer styles.

[9] Create a new shape with the help of Rounded Rectangle Tool.
Right click select make selection fill that layer with #00659b.

[10] Create the following selection selection with Rounded Rectangle Tool.
Then hit the delete key.

[11] Create another selection with Elliptical Marquee Tool. Hit the delete key.

[12] Take the “Dodge Tool” create following highlight with the help of Dodge Tool.

[13] Now create a new shape with the help of Rounded Rectangle Tool.
Fill that layer with Black. Do not “D” select. After that go to
Select>Modify>Contract Selection by 15 px.

[14] Now hit the delete key your image something like this.

[15] For this shape add the following layer styles.

[16] Create a new shape with the help of Rectangular Marquee Tool.
Right click select make selection fill that layer with White.

[17] For this shape add the following layer styles.

[18] Take the Pencil Tool set the brush size is 1 px.

[19] Make a new layer draw a line like me.

[20] Change the Opacity 34%.

[21] Take the Text Tool apply the following settings.

[22] Create some text like me.

[23] Thanks for read this Photoshop Tutorial.
I hope this is a good tutorial & U can use these Photoshop Techniques & the
Final Image should look like as shown below.

adobe photoshop effects
adobe photoshop logo
adobe photoshop watermark

3dmodel study lamp studio tutorial.

3dmodel pool stick studio tutorial